Resetting any device can be a task that many people find challenging, and interestingly, it’s a solution often recommended. If it were as straightforward as merely restarting a device, there wouldn’t be much cause for concern. However, there’s a distinction between turning off or restarting a device and resetting a Ring Floodlight Cam. When you reset it, you restore it to its factory settings. It means you need to set up your Ring device from scratch, and it can be another frustrating task.

Ring Floodlight Cam

The Ring Floodlight Cam is one of the best outdoor security cameras for rural areas and urban areas, of course. It plugs into power, so you don’t need to worry about changing batteries. It has a Two-Way Talk feature and a loud siren to scare off intruders. Plus, it sends motion-activated notifications. You also get clear video in HD and color night vision. And it’s bright with 2000 lumens, which is enough to light up your yard.

Reasons For Resetting Ring Floodlight Cam

There’s nothing without reason, and if you have any of the following reasons, you can reset Ring Floodlight Cam. However, it should be done as a last resort.

Ring Floodlight Cam Light Stays On

As we all know, the Ring Floodlight Camera has a 270-degree field of view, which means it is quite sensitive to motions. If it detects any motion within this angle, the floodlight turns on. However, there are times when the Ring Floodlight Cam light stays on even after the object has moved on. Some similar scenarios also occur where your Ring Cam’s light shows irrational behaviour. All of these scenarios call for a hard reset Ring Floodlight Cam.

Floodlight Cam Does Not Light Up

When you set up a Ring Floodlight Cam, you may notice that the floodlights do not light up. However, you should check first if the wires are connected correctly. Secondly, the Ring Floodlight cam uses 110 to 240 volts and 24 watts of power. If the wires are connected correctly and receive enough power, you have no option but to go for a hard reset Ring Floodlight Cam.

Change Of Ownership

If you plan to buy a new device, resetting a Ring Floodlight Cam is necessary. You have to remove your account and personal information from the device. Secondly, it makes setting up a device easier for the new owner. When resetting a Ring Floodlight Cam, you remove any shared user accounts that may access the camera under the new ownership.

Network Changes

Resetting your Ring Floodlight Cam is also necessary when changing your home network. This is because your camera needs the updated WiFi network. If your previous router was acting up. Resetting ensures the camera can communicate with your network using the new information. It simplifies troubleshooting and prevents connectivity issues when network details are outdated

How To Factory Reset Ring Floodlight Cam

To hard reset the Ring Floodlight Cam, press the setup button on the top for 30 seconds. Once the reset is complete, the Ring floodlight cam will flash for a few seconds before a fresh restart.

The reset button on the Ring Floodlight Cam is on the top of the camera, just above the camera lens. When resetting, ensure the camera is connected to the power source. Otherwise, you will not be able to perform the function. 

Although you may face minor issues with the Rin Floodlight Cam, it is one of the best wired outdoor security cameras without a subscription, that is, if you don’t want cloud storage.

Ring Floodlight Cam Hard Reset Not Working

First, double-check that you are performing the hard reset correctly by pressing the reset button for approximately 30 seconds until you see a light flashing. Also, check that the device is connected to the power source and it is also connected to the internet. 

Additionally, consider power cycling the Floodlight Cam before attempting another reset. To do this, turn off the power supply to the camera, wait for a few minutes, and then turn it back on. Power cycling sometimes provides a simpler solution with the camera’s reset function.

Although hard resetting a Ring Floodlight cam shouldn’t be a problem, sometimes solving the problem becomes a problem. A Ring Floodlight Cam flashing light pattern is an easy way to identify whether your Ring device has entered setup mode.

Certainly, here is the table with the image rows removed:

Activity	Passwords are case-sensitive and should not contain blank spaces.
Setup Mode	White blinking light – camera is preparing itself internally for setup.
Provisioning	White solid light – camera is preparing itself internally for setup.
Failed Setup – Incorrect Password	Red flashing light – flashes rapidly for up to 2 minutes.
	Failed Setup – Not Connected to the Internet
Failed Setup – Not Connected to Ring Network	Blue flashing light – flashes rapidly for up to 2 minutes.
	The Ring Network is a temporary access point used for setup before connecting to your home Wi-Fi network.
Blinking red means a lower battery charge.	Green flashing light – flashes rapidly for up to 2 minutes.
Successful Setup	Solid green light for 5 minutes, then turns off.
Battery Status	Solid red means connected.
	Blinking red means lower battery charge.
	The faster the blink, the lower the charge.

Conclusion

Ring Floodlight Cam is one of the best outdoor security cameras. However, the best doesn’t mean it will not cause problems for you. What you can do, however, is reset your Floodlight Cam. As discussed above, you should reset the device only when there’s a need for it.