If you want to install Ring Doorbell on brick, you may find the installation a bit tricky and some DIY. However, with the right methods and tools, it is easy to install a Ring Doorbell. We’ll discuss 4 easy methods to securely mount your Ring Doorbell, even if you are a DIY beginner. If you’re looking to monitor your front door without compromising the security of Ring Doorbell itself, these techniques are easy to follow.

Let’s get started with the step-by-step instructions.

1. Drill and Wall Anchors Method

Installing a battery-powered Ring Doorbell on a brick wall involves drilling pilot holes into the brick at your chosen location. You will install the mounting bracket in these holes.

Next, insert wall anchors into these pilot holes. These anchors provide stability and ensure that the screws used for attaching the bracket stay firmly in place.

Attach the mounting bracket to the brick wall with the anchors in position. Ensure it is level and securely fastened to the anchors using screws. This bracket serves as the base for your Ring Doorbell. 

Connect the wires to the screws on the mounting bracket. You can correct the wires in any order. Make sure that the wires don’t touch each other. Now, you can install the Ring Doorbell itself onto the mounting bracket. 

If you have a wired Ring Doorbell, make the necessary connections before installation to ensure that your doorbell is connected to the power source. Some Ring Doorbell packages include an adjustable mounting plate like Ring Video Doorbell 2nd gen, so you don’t have to buy a separate bracket.

Before using any of these 6 methods, ensure your Ring device is pre-set up, the battery is fully charged, and the doorbell is synchronized to the Ring app.

2. Use Masonry Screws

Using the masonry screws, you can mount the bracket directly to the brick surface. You can use a 15/64” masonry bit as it is long to drill a hole to provide a stable anchor for the bracket.

Position the mounting bracket where you want to install your Ring Doorbell, ensuring it’s level and aligned with your desired height. Using a power drill with a masonry bit, carefully drill holes through the bracket’s mounting holes and into the brick.

Insert the masonry screws through the bracket and into the pilot holes in the brick. Use a screwdriver or the drill with a screwdriver bit to drive the screws firmly into the brick. Make sure the bracket is securely attached.

Check the stability of the bracket and its support so that you can install Ring Doorbell on brick. Now, you can attach the Ring Doorbell to the mounting bracket.

3. Adhesive Strips

Clean the brick surface where you want to install the Ring Doorbell, as removing dust and debris is crucial for the adhesive to bond effectively.

Prepare the mounting bracket, ensuring it’s clean and free of dirt or residue. A clean bracket helps the adhesive strips adhere better.

Use heavy-duty adhesive mounting strips designed for outdoor use. Apply these strips to the back of the mounting bracket. Carefully position the bracket on the cleaned brick surface at your desired location. 

Press firmly and evenly to create a strong bond between the adhesive and the brick. Hold it in place for a few seconds to let the adhesive set. Once the mounting bracket is securely attached, you can mount your Ring Doorbell. It is a simple Ring no drill mount solution.

2-in-1 Solution

There are many people whose Ring Doorbell is stolen. If you live in a quiet neighborhood or a lousy apartment, Ring doorbell stolen is common. There’s a 2-in-1 solution. You can install an Anti-Theft Doorbell Mount. Interestingly, you don’t need any extra tools for the Ring Doorbell installation process or no drilling. It is one of the most straightforward solutions to install Ring Doorbell without drilling.

4. Use tape as a DIY

The DIY tape method is a cost-effective alternative to the official Ring no-drill mount (Remember: When you buy a Ring Doorbell with a no-drill mount, you pay extra cash). You only need a standard double-sided tape, or you can choose heavy duty double sided tape. 

You should use multiple layers of adhesive strips for a strong bond when installing a Ring Doorbell. You should use weaker adhesive strips suitable for short-term use but don’t stick well in humid conditions. However, go for heavy-duty industrial strips. They can cause damage to your house by chipping paint or leaving adhesive residue.

Conclusion

If you are installing a Ring Doorbell on a brick wall for the first time, I suggest an official Ring no drill mount option. You can use the drilling option if you don’t want to spend extra money. You have to be careful about measurements, holes, and the installation process so that the surrounding surface of the drilling stays in good shape. 

Can you install a Ring Doorbell on brick? You can install Ring Doorbell on brick using drill and wall anchors, no-drill mount, and DIY tape method. All you need is a bit of drilling and DIY!